Yamaha Disklavier E3 Operation Manual - Shutting Down The Disklavier

Getting Started

2

Chapter

14

Note:

Press [ON/STANDBY] on the 

remote control to turn the Disklavier 

back on.

Press [ON/STANDBY] on the remote control. 

The ending screen appears, and [ON/OFF] on the control unit lights 

red.

Note:

Be sure to wait 5 seconds before 

turning the Disklavier back on.

Press [ON/OFF] on the control unit.

The ending screen appears, and [ON/OFF] on the control unit turns 

off.

Note:

If the external medium contains a 

number of albums or songs, it may 

take some time for the Disklavier to 

recognize them.

Compact Disc

The Disklavier can play songs on commercial audio CDs and data CDs 

(such as PianoSoft·PlusAudio).

•

The audio CDs should be formatted in CD-DA.

•

The data CDs should be formatted in ISO 9660 Level 1.

Note:

Yamaha does not assure the 

operation of commercially available 

USB flash memories or USB hard 

disk drives. For a list of compatible 

products, please visit: 

www.yamaha.com/disklavier

/

USB Flash Memory

You can use commercially available USB flash memories to store song 

data. The USB flash memory should be formatted in FAT16 or FAT32 file 

system.

USB Hard Disk

Note:

Do not insert or remove the USB 

media while reading or writing data. 

Make sure that reading or writing 

has finished before doing so.

You can use commercially available USB hard disk drives to store song 

data or make a backup of song data. The USB hard disk drive should be 

formatted in FAT32 file system.

Floppy Disk (Optional)

With the optional USB floppy disk drive, you can use 3.5” 2DD or 2HD 

floppy disks to store song data. The floppy disk should be formatted in MS-

DOS.

Turning Off the Disklavier (Standby Mode)

See you again

Shutting Down the Disklavier

See you again

Compatible Media Format for the Removable Media