Yamaha Grizzly 700 FI Owner's Manual - Checking The Spark Plug
8-20
8
2. Install the rear carrier by installing the bolts
and tightening them to the specified torques.
3. Install the seat.
EBU23211
Checking the spark plug
The spark plug is an important engine component,
which is easy to check. Since heat and deposits
will cause any spark plug to slowly erode, the spark
plug should be removed and checked in accor-
dance with the periodic maintenance and lubrica-
tion chart. In addition, the condition of the spark
plug can reveal the condition of the engine.
To remove the spark plug
1. Remove the spark plug cap.
Tightening torques:
Carrier bolt (upper):
48 Nm (4.8 m·kgf, 35 ft·lbf)
Carrier bolt (lower):
48 Nm (4.8 m·kgf, 35 ft·lbf)
Carrier bolt (under the fenders):
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
1. Spark plug cap
U3B410E0.book Page 20 Friday, April 14, 2006 9:13 AM