Yamaha Grizzly 700 FI Owner's Manual - Removing A Wheel
Other manuals for Grizzly 700 FI:
Owner's Manual, Owner's Manual
Manual is about: YFM7FGPY
of
183
8-63
8
3. Remove the defective bulb by pushing it in
and turning it counterclockwise.
4. Insert a new bulb into the bulb holder, push it
in, and then turn it clockwise until it stops.
5. Install the bulb holder (together with the bulb)
by turning it clockwise.
6. Install the panel.
EBU25650
Removing a wheel
1. Loosen the wheel nuts.
2. Elevate the ATV and place a suitable stand
under the frame.
3. Remove the nuts from the wheel.
4. Remove the wheel.
1. Tail/brake light bulb holder
1. Tail/brake light bulb
1. Wheel nut
U3B410E0.book Page 63 Friday, April 14, 2006 9:13 AM