Yamaha Grizzly 700 FI Owner's Manual - page 143
Other manuals for Grizzly 700 FI:
Owner's Manual, Owner's Manual
Manual is about: YFM7FGPY
of
183
8-50
8
Adjusting the brake pedal free play
The brake pedal free play should measure 0.0–5.0
mm (0.00–0.20 in) as shown. If the free play is in-
correct, adjust it as follows.
1. Remove panel H. (See page 8-8.)
2. Loosen the locknut.
3. Turn the brake pedal free play adjusting nut in
direction (a) to increase the free play, and in
direction (b) to decrease it.
4. Tighten the locknut.
5. Install the panel.
If the correct free play cannot be obtained, have a
Yamaha dealer adjust it.
NOTE:
When adjusting the rear brake pedal free play:
●
Be sure not to step on the brake pedal.
●
Make sure the rear brake lever and brake pedal
do not move.
1. Brake pedal free play
1. Locknut
2. Brake pedal free play adjusting nut
U3B410E0.book Page 50 Friday, April 14, 2006 9:13 AM