Yamaha Grizzly 700 FI Owner's Manual - page 127
Other manuals for Grizzly 700 FI:
Owner's Manual, Owner's Manual
Manual is about: YFM7FGPY
of
183
8-34
8
6. Remove the coolant reservoir cap.
7. Disconnect the hose on the coolant reservoir
side, and then drain the coolant from the cool-
ant reservoir.
8. After draining the coolant, thoroughly flush the
cooling system with clean tap water.
9. Replace the coolant drain bolt washer if it is
damaged, install the coolant drain bolt, and
then tighten it to the specified torque.
10. Connect the coolant reservoir hose.
11. Pour the recommended coolant into the radia-
tor until it is full.
1. Radiator cap
1. Coolant reservoir hose
Tightening torque:
Coolant drain bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
U3B410E0.book Page 34 Friday, April 14, 2006 9:13 AM