Yamaha MusicCAST MCX-CA15 Owner's Manual - Resetting to The Factory
SYSTEM SETTINGS
53
AD
V
ANC
ED
OPERA
TIONS
If you want to reset all of your client’s parameters
for any reason, do the following. This procedure
resets ALL parameters, including the FAVORITES
buttons, etc. This procedure should be performed in
the following situations only:
•
When your client appears to be functioning
incorrectly for no apparent reason, and reference
to “TROUBLESHOOTING” (page 56) is of no
assistance.
•
When you have made multiple mistakes in
setting the parameters on your client and wish to
start again.
•
When you wish to reset the client completely for
use in a different MusicCAST network.
•
Resetting the client to its default settings
will not reverse any updates to the
firmware, or erase any data stored on
your MusicCAST network.
•
Because this procedure resets all of the
client’s parameters to their initial
settings, you need to set them again after
performing the reset procedure.
•
Note that when resetting all parameters,
the client also resets its network
parameters, and disconnects itself from
your MusicCAST network.
1
Press and hold MENU until the Top
Menu screen is displayed.
2
Press u / d to choose “Setup” and
press SELECT.
3
Press u / d to choose “System” and
press SELECT.
4
Press u / d to choose “System Reset”
and press SELECT.
5
Press p to begin the resetting process.
To cancel without resetting, press j .
6
The client automatically switches itself
off and then on again.
The resetting process is complete.
You cannot reset the client to the factory presets if it
is locked from the server. See “To unlock a client
from the server” (page 54).
Resetting to the factory
presets
CAUTIONS
LIBRARY
VOL
FAVORITES
SELECT
BOOKMARK
MENU
INPUT
PLAY
INFO.
GROUP
GROUP
PLAY
OFF TIMER ON TIMER
PAUSE
1
2
3
4
5
6
7
S
STOP
RANDOM
REPEAT
RECALL
MUTE
1
2
3
4
MCX-3 WD01440
2-4
1
5
Note
Top Menu
Edit Bookmark
Setup
Setup
Network
System
System
System Update
System Reset
Press PLAY to restore
to factory setting.