Yamaha MusicCAST MCX-CA15 Owner's Manual - Controls and Functions
4
1
AUDIO OUT jacks
Connect a receiver or amplifier (audio input source)
to these jacks.
2
AUDIO IN jack
Connect an external stereo source, such as a DVD
player or control amplifier if you want to listen to
audio from that source.
3
IR/CTRL jack
Connect an IR flasher (infrared emitter) to this jack
if you want to control a YAMAHA AV receiver
registered on a client.
When this unit is connected to a client, this jack
functions as an IR output jack.
When this unit is connected to an external
component and the operation mode is set to “C”,
this jack functions as a control input jack.
4
STATUS indicator
Lights up when this unit is active (receiving a
signal).
Dims when this unit is in sleep mode.
Flashes rapidly when the protection circuitry has
been activated or an abnormality occurs.
Alternates between fully lit and dimmed for 10
seconds when this unit is first connected to a power
source.
5
SW OUT jack
Connect a subwoofer to this jack to enhance bass
frequencies.
6
VIDEO OUT jack
Connect a TV or monitor to this jack if you want to
display the client on-screen menu on the TV/
monitor.
7
DC IN 12V jack
Connect the AC adaptor to this jack to supply power
to this unit or distribute power to a client.
CONTROLS AND FUNCTIONS
Front panel
MCX-CA15
MCX-CA15
AUDIO OUT
SW OUT
VIDEO OUT
IR/CTRL
STATUS
DC IN 12V
AUDIO IN
2
3
4
6
5
7
1
00_MCX-CA15_Owners_UB.book Page 4 Friday, April 30, 2004 10:53 AM