Yamaha MusicCAST MCX-CA15 Owner's Manual - Editing Tuner Preset Names

MusicCAST Version Upgrade 2

35

Editing tuner preset names

When you distribute radio programs from the connected controllable Yamaha AV

receiver, you can select radio stations preset on the AV receiver (called “Tuner pre-

sets”) with the MusicCAST server operations. Previously, the MusicCAST server dis-

played the list for tuner presets by ID (A1, A2, etc.) programmed on the AV receiver,

but the version upgrade enables you to edit tuner preset station names as you like and

display the list by name. For information on the tuner preset function, refer to the

owner's manual of your AV receiver. (Checking controllable AV receivers: see page

133 of the MCX-1000 Owner’s Manual, connection settings: see page 90 of the MCX-

1000 Owner’s Manual, AV receiver parameter settings: see page 122 of the MCX-

1000 Owner’s Manual)

Follow the procedure below to edit tuner preset station names displayed on the 

MusicCAST server.

1

Select “Top Menu” 

➞ “AV receiver”.

The settings screen for the Yamaha AV receiver connected to your MusicCAST 

server appears.

2

Use i to move the cursor to the “Preset” column.

The tuner preset selection screen appears.

3

Use u/d to select the tuner preset station name you want to edit 

and press SUB MENU.

The Sub Menu appears.

• To use this function,  you need 

to set the AV receiver’s input 

source to “TUNER”.

• Tuner preset station names 

edited using this function appear 

only available on the 

MusicCAST server. This 

function does not change the 

names displayed on the AV 

receiver. 

The maximum number of 

characters for a tuner  preset 

station name is 30.

Note

Number of characters for 

tuner preset station names