Yamaha MusicCAST MCX-CA15 Owner's Manual - Starting Broadcast

Broadcast

8

MusicCAST Version Upgrade 1

Starting Broadcast

1

Press BROADCAST on the MusicCAST server remote control. When 

the message “Broadcast ON?” appears on the display, use u/d to 

select a MusicCAST client.

2

Press SELECT to check/uncheck the target client selection 

checkbox.

The MusicCAST server targets MusicCAST clients with checked selection boxes 

for Broadcast.

Repeat this step to change settings for other MusicCAST clients.

3

Use the u/j/d/i keys to select “OK” and press the SELECT key.

Broadcast starts on the MusicCAST server and the selected MusicCAST clients.

After Broadcast starts, select songs for playback on the MusicCAST server using 

the standard selection procedures (see page 30 of the MCX-1000 owner’s 

manual).

Broadcast icon

MusicCAST server

MusicCAST client

You can also start Broadcast by 

selecting “Broadcast” from the 

Sub Menu of the Play Information 

screen, then carrying out steps 4 

and 2, 3 from the procedure on 

this page.

You can preset specific 

MusicCAST clients to target for 

Broadcast (see page 9).

X

You cannot start Broadcast 

from the “Recording”, “Timer 

Setup”, or “System Setup” 

screens.

X

Starting Broadcast turns off the 

Timer functions of the 

MusicCAST server and 

MusicCAST clients. The Timer 

functions do not return to their 

previous state when you stop 

Broadcast. Please reset these 

functions to suit your needs.

X

You cannot use the MusicCAST 

client to playback a signal from 

an external input on the 

MusicCAST server when the 

MusicCAST server is in 

Broadcast mode.

Press BACK, or move the cursor 

to “Cancel” and press the 

SELECT key, to return to the 

previous screen.

Starting Broadcast from 

the Play Information 

screen

Setting default target 

MusicCAST clients

Note

To cancel the Broadcast 

selection process.