- DL manuals
- Yamaha
- Software
- PM1D Manager V2
- Supplementary Manual
Yamaha PM1D Manager V2 Supplementary Manual
Summary of PM1D Manager V2
Page 1
Pm1d system software v1.4 supplementary manual e.
Page 2: Contents
2 contents new functionality in system software v1.4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 digital gain for input channels / insert inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 procedure . . . . . . . . . . . . . . . . . . . . . . ....
Page 3
New functionality in system software v1.4 3 thank you for purchasing the cs1d. This booklet explains the functionality that was added or changed in version 1.4 of the pm1d software. New functionality in system software v1.4 the following functionality and specifications have been added in version 1....
Page 4
Pm1d manager for windows operating manual 4 ■ if a digital i/o card (my card) is assigned ■ if 2tr in is assigned ■ if the output of an effect return is assigned ■ if a geq output is assigned digital gain can be used to adjust the input sensitivity in a range of +10 db– –20 db (the knob will not tur...
Page 5
Digital gain for input channels/insert inputs 5 if 2tr in is assigned to an input channel/insert input, the gain settings of the 2tr in screen and the ha/insert screen will be linked. These set- tings cannot be set to different positions. The digital gain of an input channel/insert input to which 2t...
Page 6: Digital Gain Added to 2Tr In
Pm1d manager for windows operating manual 6 digital gain added to 2tr in digital gain has been added to the six 2tr in inputs, allowing you to adjust the input sensitivity in the digital domain. The sensitivity of the signal that is input to each 2tr in can be adjusted independently for l and r. In ...
Page 7
Balance control for input channels/st in channels 7 ■ vari type mix bus if a vari type mix bus is paired, the pan parameter of the mix bus will change to a balance parameter. (a bal knob will be displayed instead of a pan knob in the pan/routing function ch to mix screen.) in this case, the signal o...
Page 8
Pm1d manager for windows operating manual 8 hint even if the balance button is on, the signal that is sent from those input channels to a fix type mix bus will not be affected if the fixed mix pan but- ton is turned off for both channels. In addition, the operation will change as follows if the pan ...
Page 9
Temporary monaural setting for paired input channels/st in channels 9 temporary monaural setting for paired input channels/st in channels the input signal from paired input channels or st in channels can now be temporarily converted to monau- ral. You can select one of the following three modes. ■ s...
Page 10
Pm1d manager for windows operating manual 10 even if l-mono or r-mono is selected, you can edit the parameters of the channel that was forced off. (however, the [on] switch will be fixed at off until you defeat the l-mono or r-mono setting, and cannot be changed.) a new preference setting [l,r-mono ...
Page 11
Temporary monaural setting for paired input channels/st in channels 11 the temporary monaural mode will be defeated, and the pan (balance) will return to the positions specified for the pair. The mix send pan setting (or balance setting) will be set to the same position as to st. Hint in order to pr...
Page 12
Pm1d manager for windows operating manual 12 however, cue on/off and recall safe that are not set independently for l and r in a st in channel will be linked or non-linked as a pair, even if lr-mono is selected. For a st in channel, these parameters will always be linked regardless of the temporary ...
Page 13
Temporary monaural setting for paired input channels/st in channels 13 if pan is changed: *1: pan refers to any of the pan modes individual pan, gang pan, or inverted gang pan. *2: this is the operation that occurs when the pan mode is changed in the screen. If it is changed by a scene recall, it wi...
Page 14
Pm1d manager for windows operating manual 14 *1: pan refers to any of the pan modes individual pan, gang pan, or inverted gang pan. *2: this is the operation that will occur when pairing settings are changed in the screen or panel. If pairing settings were changed as a result of a scene recall, the ...
Page 15: M/s Decoding
M/s decoding 15 *1: pan refers to any of the pan modes individual pan, gang pan, or inverted gang pan. M/s decoding m/s decoding functionality is now provided, allowing a two-channel signal input from a ms mic through adjacent odd- numbered/even-numbered input channels to be converted into l/r signa...
Page 16
Pm1d manager for windows operating manual 16 3. Access the pan/routing function m/s screen. 4. Click the m/s decode on/off button for the corresponding two channels, to turn the button on. With this setting, the odd-numbered (l) channel will input the (m+s) signal, and the even-numbered (r) channel ...
Page 17: Tracking Recall Function
Tracking recall function 17 tracking recall function a “tracking recall” function has been added, which lets you add a pre-specified offset value to the value of each fader when a scene is recalled. You can use this tracking recall function when (for exam- ple) you want to make fine adjustments to t...
Page 18
Pm1d manager for windows operating manual 18 procedure here's how to use the tracking recall function. 1. Access the scene function tracking recall screen. In the tracking recall screen, tracking can be turned on/off for each channel, and you can specify the offset value that will be applied to each...
Page 19
Tracking recall function 19 • if the offset lock button is off for a channel that is channel-copied, the offset value will also be copied. When the power of the cs1d is turned off, and then on once again, the enable button of the tracking recall area will be turned off for the sake of safety, disabl...
Page 20
Yamaha corporation ip 20 pro audio & digital musical instrument division p.O. Box 3, hamamatsu, 430-8651, japan printed in japan.