Zanussi Electrolux Built-in oven Instruction Book - page 4
46
Oven function control knob
(fig. 2)
It enables to select the most appropriate
type of heating for the different cooking
requirements by appropriately connecting
the heating elements and adjusting
temperature to the required level.
Meaning of the symbols:
Oven lamp
50-250 Range of temperature regulation
for conventional cooking
Bottom heating element
Top heating element
To select the temperature turn the switch in
a clockwise direction and place sign in front
of the symbol corresponding to the
temperature required, included between 50
and 250°C.The temperature will be
maintained constant by the thermostat.
If a different type of heating is required, for
example more heat on the bottom or the top,
you should turn the switch to the symbols
(heat from below) or
(heat from
above). In these conditions the temperature
will never exceed 250°C.
Hotplate control knobs
The Control Knobs for the hotplates (Fig. 3)
can be found on the oven control panel. The
energy regulator of the hotplates can be set
by means of a 7-position control knob:
0 = Off
1 = Minimum
3 = Maximum
The intermediate positions give an increasing
heating power.
Carefully supervise cookings with oil
or fats, since these types of food can
result in a fire, when over-heated.
Electric oven
0
010
05
5 10
0 20
5 20
FO 2623
Fig. 2
Fig. 3
Control lights
Oven thermostat control light: This light
goes off when the oven heats up to the
temperature set and comes on again every
time the thermostat cuts in to stabilize
temperature.
Operating control light: It indicates that
one or more of the heating elements are
turned on.
Safety thermostat
In order to avoid excessive overheating due
to incorrect use of the appliance or else to a
faulty component, the oven is equipped with
a safety thermostat which cuts off the power
supply if necessary. Operation is restored
automatically when the oven temperature
decreases to normal values. Therefore, if the
thermostat cuts in because you have not
been using the appliance correctly, the oven
can be used again simply by waiting for the
appliance to cool down. If, instead, the
thermostat cuts in because of a faulty
component, you should call the Service
Department.
0
1
2
3
FO 2143