Zartek ZA-601 Instruction Manual - page 14
13
N.B. All slave handsets can be cloned at the same time using one master handset.
Programming other channels on same handset:
•
It is possible for a handset to communicate with other handsets provided they are all set on the
same channel and have been cloned with the same security code.
•
Programming another channel on the same handset is done by first changing the operating
channel on the handset and then cloning it with the second handset.
•
To change the operating channel first turn off the handset and then switch it on whilst pressing
the CALL button 10 and ON/OFF button 8 . Select the channel corresponding to the second
handset and switch OFF to confirm.
•
Clone the handset using the procedure above.
•
To communicate with the original channel the handset’s channel will need to be changed.
Programming the Back Gate
•
By default all caller units are front gate caller units (station A). An internal modification is
needed to change the unit into a back gate caller unit (station B) so that it can function on
the same channel.
•
Gate opening will activate only on the caller unit that initiates the call and an A or B will appear
on the LCD screen indicating which gate has been pressed.
N.B. A call from the back gate caller unit needs to be initiated and in progress for the gate to be
opened. Only one locking action can be made during each call.
•
Only single channel stations can be used for a back gate function and additional back gate
caller units can be added on the same channel.
Press button 8 momentarily to return
to normal operation.
Press button 8 momentarily to return
to normal operation.
CALL
8
CALL
8
CH
˚C
Outdoor
CH
˚C
Outdoor