Zebex Z-3151HS User Manual - page 24

Advanced Handheld High-Speed Laser Scanner 

18 

U

SER

’

S 

M

ANUAL

Start Of Configuration 

3. 

General Scan Mode Setting 

Handheld Operation 

Barcode 

Value 

Barcode Label 

Description 

SM01 

Trigger Mode 

The scanner becomes inactive as soon as the data 

is transmitted. It must be triggered to become 

active again. 

SM02 

Auto Scan Mode   

The scanner is still active after the data is 

transmitted but the successive transmission of 

the same barcode is not allowed when the trigger 

switch is pressed again.   

SM04 

Pulse Mode   

The scanner will light up and blink when press the 

scanner trigger switch once and the scanner will 

turn off after next pressing. The laser remains on 

for approximately 3 to 10 seconds after the pulse 

light is on. 

SM07 

Auto Trigger Mode 

The scanner will automatically detect object and 

activate laser lighting. Barcode data is 

transmitted when the trigger is pressed.  

SM08 

Aim Mode 

When the trigger is pressed once, the scanner 

will light up, blink and decode automatically. But 

the data is transmitted only when the trigger is 

released. The scanner will turn off when the 

trigger is pressed again.   

SM09 

Momentary mode 

The scanner will light up only when the trigger 

switch is pressed the scanner will turn off when 

the trigger switch is release.   

End Of Configuration