Zebra 2844 Printer User Manual - Adjusting The Guides

Adjusting the Guides

The adjustable guides direct the media

toward the platen and print head.

1. Open the media guides by turning the

guide adjuster knob to the rear.

2. Thread the media through the guides.

3. Close the media guides by turning the

guide adjuster knob to the front.  They

should just touch, but not restrict, the

edges of the media.

4. Unless you need to load ribbon, close

the top cover.  Remember that you

need to release the cover lock, lower

the top cover, and press down until the

latches snap into place.

10

980487-001A