Zebra 2844 Printer User Manual - The ^default Command.

Resetting the Factory Default Values

Sometimes, resetting the printer to the factory defaults solves some of the

problems.  For troublehooting and to overwrite all stored parameters, send

the ^default command.

Communications Diagnostics

If there is a problem transferring data between the computer and printer, try

putting the printer in the communications diagnostics mode.  The printer

will print the ASCII characters and their respective hexadecimal values (a

sample is shown below) for any data received from the host computer.  To

find out how, refer to the power off mode procedure in “Manual

Calibration” on page 40.

980487-001A

41