Zebra 2844 Printer User Manual - Removal

Replacing the Platen

Removal

Open the printer and remove any media.

1. Using a pointed stylus (such as

tweezers, small slot-head screwdriver,

or razor-knife), unhook the tabs on the

right and left sides.  Then rotate them

forward.

2. Lift the platen out of the printer’s

bottom frame.

Assembly

Make sure the right bearing is on the shaft

of the platen.

1. Align the platen with the gear to the

left and lower it into the printer’s

bottom frame.

2. Rotate the tabs back and snap them

into place.

30

980487-001A

MOVIE