Zebra 400 User Manual - Troubleshooting Tests

36

PA/PT400 & PA/PT 403 User’s Guide

correct communications port on the computer is selected. Next, verify

that the same handshaking is in use by both the printer and the

computer. Then, ensure that the communication parameters of the

printer and the computer match. Refer to “Communicating with the

Printer” in “Getting Ready to Print”.

Troubleshooting Tests

Printing a Configuration Label

To print out a listing of the printer’s current configuration (a sample

is shown in Figure 28), refer to “Feed Button Modes” in this chapter.

Recalibration

Recalibrate the printer if it starts to display unusual symptoms, such

as skipping labels. See “Calibration”.

Resetting the Factory Default Values

Resetting the printer to the factory defaults can solve some printer

problems. Follow the instructions in ‘Feed Button Modes” in this chap-

ter.

F

IGURE

 28

F

IGURE

 29