Zebra ZC100 Series User Manual - Setup
9
Setup
Unpacking
It is important that the printer packaging be saved in case it needs to be returned to Zebra. Maintain the box, bag, and
inserts; include the power supply when shipping. You do not need to pack the USB cable or any documentation.
1. Open the box and remove the power supply, power cable, and USB cable.
2. Remove the top tray.
3. Remove the printer in the bag.
4. Remove the printer from the bag and place it in the desired location. Refer to the product Technical Specification
(www.zebra.com/zc100-info or www.zebra.com/zc300-info) for weight restrictions and required distances around
the printer.
Connecting Power
The ZC100 and ZC300 Series printers use a 100 watt power supply.
Do not use any other power supply.
1. Connect the female end of the power cable to the power supply.
2. Connect the device end of the power supply cable to the printer.
3. Connect the receptacle end of the power cable to a compatible
power source.