Zebra ZC100 Series User Manual - page 7
Introduction
3
Zebra PrintTouch—This touch point uses NFC technology to provide key information about the printer; go to
http://www.zebra.com/nfc for details.
LCD Interface—The ZC300 Series printers are equipped with a LCD interface to display menu items and errors, and
three action buttons to enable menu choices.
Input Hopper—The ZC100 and ZC300 Series printers have a 100-card (30-mil) hopper capacity.
Power Button—The power button houses a red and green LED to indicate the power status.
Status Indicators—The ZC100 and ZC300 Series printers are equipped with several indicators that displays printer
status, ribbon status, and cleaning status.
Output Hopper—The ZC100 and ZC300 Series printers are equipped with a 100-card (30-mil) hopper capacity.
Top Cover Release—Open the top cover to load and remove printer ribbon, clear a card jam, install upgrades, and
access the printhead for easy replacement.
Power—The ZC100 and ZC300 Series printers use a 100-watt power supply. Make sure to use the power supply
that came with the printer.
USB 2.0—For direct connection to a PC.
10/100 Ethernet—Used to connect the printer to a network.
5LEERQ&DUWULGJH
3ULQWKHDG
Printhead
Ribbon Cartridge