Zeiss LSM 510 Brief Operating Manual - Starting The System

07/05  

3 

Starting the System 

Switching on the LSM system 

•  When set to ON the REMOTE CONTROL switch 

labeled  System/PC provides power to the 

microscope and the computer. This allows to 

use the microscope and the computer without 

running the LSM Software (Fig. 1).  

•  To switch on the system completely put the 

Components  switch also to ON. Now the 

complete system is ready to be initialized with 

the LSM Software. 

Switching on the HBO 100 mercury lamp 

•  Switch on the HBO 100 mercury lamp via the 

switch of the power supply, see operating 

manual of the mercury lamp or microscope. 

Switching on the Enterprise UV-Ar Laser 

•  If the UV laser is required, switch it on via the 

toggle switch (Fig. 2/1) of the power supply. 

−  It will be ready for operation after a few 

seconds.  

Fig. 1 

REMOTE CONTROL switch 

Fig. 2 

Power supply of UV-Ar laser