Zektor CVS4 User Manual - More Remote Options
CVS4 Component Video Switch
CVS4 Component Video Switch
More Remote Options
Front panel LED sequencing while learning
During the learning process, as each button of the remote is
pressed, the front panel LEDs will sequence. At any given time, the
LED(s) that are slowly flashing, indicate the function the CVS4 is cur-
rently waiting to learn. The sequence is:
Standby LED
Waiting for Power Toggle IR code.
'1' - LED
Waiting for the '' IR code.
'2' - LED
Waiting for the '2' IR code.
'3' - LED
Waiting for the '' IR code.
'4' - LED
Waiting for the '4' IR code.
Standby & '1' LEDs
Waiting for discrete ON code.
Standby & '2' LEDs
Waiting for discrete OFF code.
Standby & '3' LEDs
Waiting for input sequence code.
If the LEDs do not sequence, and the IR LED does not flash, when a
button is pressed on the remote, then the CVS4 does not recognize
the IR code being sent. Make sure the remote's batteries are fresh.
The CVS4 will work with most remotes, however there are a few
exceptions. Some technical reasons for not work ing with some re -
motes are: The remote may be using a carrier frequenc y outside the
range of the CVS4 (4KHz to 42KHz), or it may be using one of the
few protocols the CVS4 does not understand, like the Philip's RC
and RC6 protocols.
If the CVS4 does not learn the remote codes you are using, you will
have to use another remote, or in the case of using a universal re -
mote, you'll have to pick a different manufacturer's code.
Skipping or Deleting IR codes
During the IR learning process you can choose to delete the current
code (disable IR for that function) or sk ip the current code (leave it
unchanged) by pressing the '' or '4' buttons:
'3'
Disable IR for current function.
'4'
Sk ip current code, leave it unchanged.
1 2 3 4
1 2 3
4 5 6
7 8 9
0
+ +
_ _
POWER
VOL
CH
The IR LED will flash...
...and the LEDs will sequence each time a
remote control button is pressed if the IR
code is compatible with the CVS4.
1 2 3 4
1 2 3
4 5 6
7 8 9
0
+ +
_ _
POWER
VOL
CH
Skip current code
(Leave IR unchanged)
Disable IR for current func-
tion being learned.
Front panel LED sequencing while learning
Skipping or Deleting IR codes