Zenit BC-1400 Instruction Manual - page 5
5
5. Follow instruction on blades operation and installation.
6. Blade thrust may occur when the spinning blade contacts a solid object. Blade thrust may
lead to serious injury. Keep others including children, animals, bystanders and helpers outside
the 15 m hazard zone. If the blade thrusts from a solid object, stop the motor and wait for the
spinning blade to stop. Then check the blade for damage.
7. Always wear eye, head and ear protection when using this tool. Keep others including chil-
dren, animals, bystanders and helpers outside the 15 m hazard zone.
8. Check your brush cutter before every use. Never operate the brush cutter until all blade
guards and guard extensions are installed.
9. Blade continues to spin by inertia after the brush cutter is switched off. Spinning blade can
cause injury to you or bystanders. Before maintenance switch off the brush cutter and make
the blade has stopped.
10. Keep others including children, animals, bystanders and helpers outside the 15 m hazard
zone.
11. Wear protecting footwear and gloves. Never operate without blade guard.
WARNING!
Do not modify the unit in any way.
Improper use may cause serious injury or even death.
Description
-
1.
Cutting attachment
2.
Gear case
3.
Blade guard
4.
Drive shaft tube
5.
Joint case
6.
D-shape handle
7.
Electric motor
8.
On/Off switch
1
2
3
4
5
6
7
8