Zenit BC-1400 Instruction Manual - page 6
6
technical specifications
Model
BC-1400
Rated power
1400 W
Rated voltage
220-240 V
Rated frequency
50-60 Hz
Max speed
10000 rpm
Net weight/gross weight
4,0/5,0 kg
Standard accessories
Attachment connector
1
Harness
1
3-blade metal blade
1
Trimmer head
(2 nylon lines)
1
Set of wrenches
1
All data subject to change without notice
Danger zone
Only the operator must stay in the danger zone. Operator must wear protecting equip-
ment, protecting legs, feet, eyes, face and ears from objects thrust. Bystanders must
wear safety goggles.
assembly procedures
1.
Drive shaft installation
•
Insert aluminum tube into the slot
•
Depress the lock
•
Direct the drive shaft to joints
•
Release the lock
•
Turn the handle clockwise to make it tight
2.
Handle installation
Insert the handle into the aluminum tube. Insert the screw and tighten it with the nut.
Insert the handle into the collar. Adjust the handle position and tighten.
3.
Additional handle adjustment
To adjust the additional handle:
-
Install the brush cutter in steady position.
-
Loosen the stop bolt.
-
Adjust the handle.
-
Tighten the top bolt.