Zenith Victoria Pavilion Assembly Instructions Manual - Hardware Pack 4
Fig.11: Insert the Long side support bar (E3) & short side support bar (F3) into the corner pipe of bottom beam of
small top (A3 & A6) as indicated in the figure.
Fig.12: Attach the assembled small top frame to the assembled big top frame as displayed in the figure.
Fig.13: Attach the Connector of small top (G3) to the Bottom beam of small top (A3 & A6) with bolts (DD) and
washers (BB); then attach the pothook (M5) to the connector of small top (G3).
Fig.14:
beam of small top (B3) on the Bottom beam of small top (A3 & A6), and fasten with nuts (KK) & washers (BB). Put
the Top cover of small top (H3) on the Connector of small top (G3), then screw the Top decor (I3) on it.
Hardware Pack 4
CC 1/4" - 20×0.6 bolt 72 PCS
DD 1/4" - 20×0.6 bolt 24 PCS
P5
Hardware Pack 3
DD
1/4" - 20×0.6 bolt 4 PCS
KK
1/4" -20 hexagonal capped
nut
8 PCS
ALUMINUM HARDTOP GAZEBO ASSEMBLY INSTRUCTION
Place the Roof cover of small top (C3 & D3) on the bottom beam of small top
place the Upper
(A3 & A6);