3Com NBX Manual - page 135
Other manuals for NBX:
Installation Manual
Manual is about: 3Com NBX 100: Installation Guide
of
158
Installing the Handset Battery Pack
135
Installing the
Handset Battery
Pack
3Com 3106C
1 To remove the battery cover,
press the latch and slide the
cover down and off of the
handset.
2 Connect the battery pack
connector. Be sure that the
colored wires are connected
correctly to the corresponding
colored connectors inside the
battery compartment.
CAUTION: Do not exert force when making this connection. You could
damage the battery or handset.
After you are certain that you have made a good connection, insert the
battery pack into the battery compartment.
CAUTION: Do not pinch the wires.
3 To install the battery cover, place
it in the groves and slide the
cover up until it snaps into the
handset.
Black
Red
White