3Com NBX Manual - page 74
74
C
HAPTER
5: P
ERSONALIZING
Y
OUR
T
ELEPHONE
Button Mapping
Notes
The following notes apply to user button mapping.
■
Button Type Functions — Not all button type functions are available
on all models of telephones.
■
Priority and Number Fields — The use of Priority and Number fields
for button mapping depend on the selected button type function.
These fields are applicable where noted in
Table 5
.
PSD 1–99
(PSD 1-10 on NBX 100)
Assigns a Personal Speed Dial (PSD) number to the button.
The NBX system includes 100 Personal Speed Dials (PSDs).
For the NBX 100, you can map the first 10 personal speed
dials using the Button Mapping window. To map the
remaining 90 personal speed dials, use the Other button
mapping, described earlier in this table.
You define the telephone numbers for each PSD in
Directory > Personal Speed Dial in the NBX NetSet
utility.
“Speed Dials”
later in this
chapter
Redial
Press this button to place a new call to the same number as
the most recent call made from this telephone.
“Dialing a Call”
in
Chapter 4
Release
Press this button to disconnect the current call and leave
the telephone idle (on hook). This feature is useful if you
use a headset when you make calls.
“Using a Headset”
later in this
chapter
SSD (System Speed
Dial)
Maps a System Speed Dial number to the button.
“Speed Dials”
later in this
chapter
Switch to DTMF
Press this button to switch this Analog Line Card port from
pulse dialing to tone dialing (DTMF). You cannot switch
from tone dialing back to pulse dialing during a call.
“Using Pulse Dialing”
in
Chapter 7
Transfer
Press this button to transfer a caller to an internal extension
or an external telephone number.
“Transferring a Call”
in
Chapter 4
WhisperPage
Press this button and when prompted, enter the extension
to initiate a WhisperPage session.
“WhisperPage”
in
Chapter 7
Wrap-Up Time
Press this button to activate the ACD Wrap-Up Time
session if this feature has been enabled by the ACD
administrator. You can use Wrap-Up Time only once per
call. However, you can extend the Wrap-Up Time session
duration by using the Extend Wrap-up Time feature.
“Wrap-Up Time”
in
Chapter 7
Xfer Vmail
Press this button to transfer a caller directly to another
person’s mailbox.
“Direct Mail Transfer”
in
Chapter 4
Table 5 User Button Mappings (continued)
Function
Button Description
For more information, see