3Com NETBuilder SI Using Manual - page 123
Other manuals for NETBuilder SI:
User Manual
Manual is about: Bridge/Router
of
212
Using the Monitor Utility
123
Flash Load
Syntax
FL
Description
The FL command formats the flash memory and uses TFTP to copy the
image from the server identified in by CL command to the flash drive.
If you are using BOOTP instead of locally configured addressing in the CL
command, you must not include the filename.
Help
Syntax
H
or
?
Description
The Help command lists all available commands in the boot monitor
along with syntax parameters.
Repeat Last
Command
Syntax
!
Description
The ! command repeats the last command entered.
Reset
Syntax
RS
Description
The RS command reboots the system.
Self Test
Syntax
ST
Description
The ST command sets the self-test action to one of the following
options:
1. Quick
2. Full