3Com NETBuilder SI Using Manual - page 51
Other manuals for NETBuilder SI:
User Manual
Manual is about: Bridge/Router
of
212
Installing a New Module (Model 5xx)
51
4 Reinstall the screw on the standoff.
5 Reinstall the cover and the cover screws.
CAUTION: The DIP switches should all be in the down position. The
DIP switches are accessible through an opening on the side of the
chassis.
6 If the bridge/router was mounted with brackets, reinstall the brackets
and remount it.
7 Reconnect the power cord and all cables.
DIP switches should all
be in the down position
Install screws