3Com OfficeConnect WX1200 Release Note - page 17
System Parameter Support
17
Documented range for RF Auto-Tuning interval is
incorrect. (18575)
The MSS Version 3.0 manuals state that the range for
seconds in the following command is 0 to 65535.
set radio-profile name auto-tune channel-inter-
val seconds
The valid range is actually 0 to 100000 seconds.
System Parameter Support
The following tables list the recommended or maxi-
mum supported values for major system parameters.
Mobility System Parameter
Supported Value
WX switches in a single Mobility
Domain
32
Roaming VLANs per WX switch
300
Does not include local statically
configured VLANs
VLANs per Mobility Domain
400
This number consists of 300 roam-
ing VLANs plus 100 local statically
configured VLANs.
MAPs per WX
WX4400: 250 configured, up to
96 active, depending on the
license
WX1200: 20 configured, 12 active
Includes directly attached MAPs
and Distributed MAPs. Inactive
configurations are backups.
Minimum link speed within a
Mobility Domain
128 Kbps
Network Parameter
Supported Value
Forwarding database entries
WX4400: 16383
WX1200: 8192
Statically configured VLANs
128
Virtual ports (sum of all statically
configured VLAN physical port
memberships)
256
Spanning trees (STP/PVST+
instances)
64
ACLs and Location Policies
ACEs per switch:
■
WX4400: 2308
■
WX1200: 700
ACEs per ACL: 267
Location Policies per switch: 1
ACEs per Location Policy:
■
WX4400: 1024
■
WX1200: 256
IGMP streams
500
Replication of a stream on multi-
ple VLANs counts as a separate
stream on each VLAN.
Management Parameter
Supported Value
Maximum instances of Wireless
Switch Manager (3WXM) simulta-
neously managing a network
3
Telnet management sessions
WX4400: 8
WX1200: 4
The maximum combined number
of management sessions for Telnet
and SSH together is 8, in any com-
bination.