3Com OfficeConnect WX1200 Release Note - page 18
18
W
IRELESS
LAN S
WITCH
AND
C
ONTROLLER
MSS V
ERSION
3.0 R
ELEASE
N
OTES
Known Problems
System Configuration Issues
Configuration of a WX4400 port for wired
authentication does not work properly. (18531)
Though possible to configure, it can result in a system
reset.
Generating an SSH key causes error messages.
(17773)
When you generate an SSH key, error messages such
as the following can be displayed:
1299.627569 ERROR: process_sigchld: process sshd
exited pid=187 status=0x100 (1/0)
SSHD Aug 23 22:38:40.503790 ERROR SSHD: read
from store failed 4
SSHD Aug 23 22:38:40.519164 ERROR SSHD: main
cannot contact store code=1 - exiting.
You can safely ignore these errors. SSH works prop-
erly after the new key is installed.
Adding a static VLAN with the same name as a
VLAN whose traffic is being tunneled through
the switch can cause the switch to restart.
(18367)
MSS can tunnel traffic for a VLAN through a WX
switch that does not have that VLAN statically config-
ured. If you attempt to add a static VLAN to a switch
that is already tunneling traffic for a VLAN with the
same name, this can cause the switch to restart.
SSHv2 management sessions
WX4400: 8
WX1200: 4
Telnet client sessions (client for
remote login)
WX4400: 8
WX1200: 4
NTP servers
3
SNMP trap receivers
8
Syslog servers
4
Client and Session Parameter
Supported Value
Authenticated and associated cli-
ents per radio
100
Clients who are authenticated but
not yet associated are included in
the total.
Active clients per radio
50
Total number of active clients
simultaneously sending or receiv-
ing data.
Active AAA sessions (clients trying
to establish active connections)
per WX switch
WX4400: 2500
WX1200: 300
These are the suggested maxi-
mums. The switch might be able
to support even more sessions,
but performance or system stabil-
ity might be affected.
AAA users configured in local
database
999
Management Parameter
Supported Value