3Com WL-560 User Manual - page 63
Viewing Event Logs
57
Click Refresh to update the information.
Viewing Event Logs
To view event logs generated by Bridge, click Event Log List on the menu.
Events recorded in the table are shown chronologically, starting from the
latest event. Information shown for each event includes:
■
Time when the event occurred
■
Severity level – For descriptions of the various severity (log) levels, see
“Configuring System Log Settings” on page 49
■
Description of the event
Country Code
The Country Code determines the available
channels and transmission power level
based on regulatory restrictions in the
county where the Bridge is installed.
Varies
Transmit Power
The level of transmission power (100%,
50%, 25%, 12%, or Min).
You can change this setting by clicking
Wireless Network under System Configuration.
100%
MAC Address
The MAC address of the Bridge.
N/A
Serial Number
The serial number of the Bridge.
N/A
Firmware Version
The version of firmware the Bridge is
currently using.
N/A
DHCP Client
Determines if the Bridge obtains its
IP address from the DHCP server on the
network.
On
IP Address
The IP address of the Bridge. You can
change this address by clicking IP Network
under System Configuration.
Varies
Subnet Mask
The subnet mask address of the Bridge.
You can change this address by clicking IP
Network under System Configuration.
Varies
Data Preamble
The data preamble setting (Short [Enhanced
performance] or Long [Wi-Fi
Interoperable]).
To change this setting, click Wireless
Network under System Configuration.
Long
System Up Time
The elapsed time since the Bridge booted
up.
Day 0, 0:00:00
Table 18 System Summary Page (continued)