3D Systems ProJet 4500 Installation Manual - page 19
Other manuals for ProJet 4500:
User Manual, Post Processing Manual
Manual is about: 3D Professional Printer
of
44
19
3D Systems, Inc.
4.
INSTALLATION MODE. REFER TO INSTALLATION GUIDE is
displayed. Press
CONTINUE
5. This alert message lets you know that the Network Cable should now
be connected.
Connect one end of a CAT-5 network cable to the Ethernet port on the
E-Box and the other to your network hardware or PC.
Click
CONTINUE on LCD
3. Power on unit by flipping power switch on E-Box.