3D Systems ProJet 4500 Installation Manual - page 32
Other manuals for ProJet 4500:
User Manual, Post Processing Manual
Manual is about: 3D Professional Printer
of
44
32
3D Systems, Inc.
5. Problems with a particular color channel may be resolved by running
STRIPE TEST => CHECKER a few times. If problems persist then a
small print job consisting of this color should be run once Core material
has been loaded.
6. If problem persists, run
REVIVE HEADS under the Utilities menu.
If the problem continues, then a small print job consisting of this color
should be run once core material has been loaded.