3D Systems ProJet 4500 Installation Manual - page 20
Other manuals for ProJet 4500:
User Manual, Post Processing Manual
Manual is about: 3D Professional Printer
of
44
20
3D Systems, Inc.
7. This alert message explains the process of changing the current
configuration type.
Press
CONTINUE.
8.
REBOOT NOW? is displayed.
TO USE DHCP CONFIGURATION:
Select
NO - The printer will now automatically be assigned an address.
You can now skip to step 9 of these instructions.
TO USE STATIC IP CONFIGURATION:
Select
YES and then a screen appears informing you to immediately
press and hold the Control Knob as the printer reboots.
This process allows you to manuallyenter an IP address.
Perform the following steps:
“A” through “E” on the next page.
6. This alert message indicates what the current network configuration
is set to (installs of new machines will always default to DHCP).
Press
CONTINUE.