3D Systems ProX DMP 300 User Manual - page 60
56
3D SYSTEMS, INC
.
PN:80-D27 Rev.B
•
Monitoring tab
Oxygen, enclosure temperature, external scannerhead temperature and enclosure pressure are traced and stored on a
tracking file. Each time a new job starts in automatic mode (see section "Manufacturing menu" on page 47), a monitoring
file is created. As long as a monitoring file is existing on the printer, it can be viewed and exported.
When the job is complete, its monitoring file is closed.
The format of the monitoring file is ".xml", and is composed by:
NameOfFABFile_Monitoring_Date(Day_Month_Year)_Time(Hour_
Minute_Second)
1 .
Click on the "Open file" button to open a
monitoring file (1).
2 .
Select the desired monitoring file from the list.
3 . The recordings will be indicated on the
information area (2), and grouped within
corresponding tab (3) .
4 . Optional: to export individually each recording
("csv" or "xml" formats), click on the "Export"
button (4) . The selected tab will then be
exported on the location you have specified.
5 .
Optional: to export all trackings files ("csv"
format), click on the "Export" button (4) . The
tracking files existing on the printer will then be
exported on the location you have specified.
When starting a purge, a similar tracking file is automatically created. The name of the corresponding
tracking file is similar, apart from the
NameOfFABFile
which is replaced by
Purge
.
•
Event viewer tab
This tab displayes all the operations done on the
machine (1), even if there is no plate loaded .
By default, only the events of the current month
are displayed . Use the arrows buttons (2) to
display the events occure previously .
To lighten the display, use the filters (3) according:
•
Event type (Information, Warnings or
Errors) .
•
Operation type (Preparation,
Manufacturing, Action) .
•
Date .
When an event is selected, the corresponding details can be
displayed by clicking on the
button . Click on "Quit" to close
the Event details .
1
2
3
4
5
1
2
3