Aastra AASTRA 9133 I User Manual - Programmable Keys
12 9133i IP Phone User Guide
Programmable Keys
Setting a "Do Not Disturb"
(DND) Key
The IP phones have a feature you
can enable called "Do not Disturb
(DND). The DND function allows
you to turn "do not disturb" ON
and OFF.
If DND is ON, callers calling into
the phone hear a busy signal or a
message, depending on how your
system administrator set up the
configuration server. The second
line on the screen of the IP phone
shows when DND is set.
If the phone shares a line with
other phones, only the phone that
has DND configured is affected.
You can set DND on the
programmable keys using the
Aastra Web UI only. DND is not
configurable from the IP phone UI.
Note: Your system administrator can
also set DND using the configu-
ration files.
From the Aastra Web UI:
1 Click on Operation->
Programmable Keys.
2 Select a "Hard Key 1" through
"Hard Key 7".
3 In the "Type" field, select do not
disturb to apply to the program-
mable key.
4 Click
to save your
changes.
5 Click on Operation->Reset.
6 In the "Restart Phone" field
click
to restart the IP
phone.
Setting a "Busy Lamp Field"
(BLF) Key
The BLF feature on the IP phones
allows a specific extension to be
monitored for state changes. BLF
monitors the status (busy or idle)
of extensions on the IP phone.
Note: The BLF setting is applicable to
the Asterisk server only.
Example
A Supervisor configures BLFs on
his phone for monitoring the status
of a worker’s phone use (busy or
idle). When the worker picks up
his phone to make a call, a busy
indicator on the Supervisor’s
phone shows that the worker’s
phone is in use and busy.
On the 9133i, the busy and idle
indicators are the LEDs next to
each BLF programmable key. The
LED illuminates steady to indicate
the monitored line is off-hook or
unregistered. The LED goes off
when the line is idle.
You can set BLF on the
programmable keys using the
Aastra Web UI only. BLF is not
configurable from the IP phone UI.
Note: Your system administrator can
also set BLF using the configura-
tion files.
From the Aastra Web UI:
1 Click on Operation->
Programmable Keys.
2 Select a "Hard Key 1" through
"Hard Key 7".
3 In the "Type" field, select BLF to
apply to the programmable key.
4 In the "Value" field, enter the
phone number or extension you
want to monitor.