Aastra AASTRA 9133 I User Manual - Handling Calls
9133i IP Phone User Guide 21
Handling Calls
To transfer a call to another
extension:
1. Connect to the call you wish to
transfer (if not already con-
nected).
2. Press k . You will hear a
dial tone as a second line opens
up.
3. Enter the extension number of
the person you wish to transfer
the call to, or dial the outside
number of the person you wish
to transfer the call to.
4. To complete a "blind" transfer,
press k again before the
phone begins dialing. To
complete a consultive transfer,
remain on the line to speak with
the party before pressing
k again. To cancel the
transfer, select Cancel on the
display screen.
Conferencing Calls
The 9133i phone system supports
up to 3 parties (including yourself)
in a conference call.
To create a conference call
1. Connect to the first party you
wish to include in the conference
(if not already connected).
2. Press l. A new line opens.
3. Enter the extension number, or
dial the outside number of the
person you wish to add to the
conference.
4. Wait for the new party to
answer. You can consult with the
new party first before adding
them to the conference.
5. To add the new party to the
conference, press l again.
6. To drop a party from the
conference, press l once
more.
7. To exit the conference leaving
the other two parties connected,
disconnect by placing the
handset back on-hook or by
pressing N.
You can use V W to scroll
through and see the numbers and
names (if available) of the parties
in the conference call.
To conference two calls you are
already connected to
1. Begin with active calls on two
different lines.
2. Press l. A new line will
open.
3. Press the line key of the call you
wish to conference with.
4. Press l again. The two
lines link into a conference call.
NOTE: When a name is displayed,
pressing U drops the displayed
party from the call.
Ending Calls
To end a call, you first need to
reconnect to the call if not already
connected (for example, if your
caller is on hold). Press Nto end
the call. If connected through the
handset, you can also place the
handset back on hook to end the
call.
=Dial
2