1. DL manuals
  2. ABB
  3. Server
  4. COM600 series
  5. User Manual

ABB COM600 series User Manual - Software Properties

Manual is about: Distribution automation controller

Summary of COM600 series

  • Page 1

    Com600 series, version 4.1 user's manual.

  • Page 3

    Contents: 1. About this manual .................................................................................. 7 1.1. Copyright ........................................................................................ 7 1.2. Disclaimer .................................................................

  • Page 4

    5. Installation ............................................................................................. 39 5.1. About this section ......................................................................... 39 5.2. Requirements for sab600 ............................................................

  • Page 5

    7. Operation ............................................................................................... 90 7.1. Activating com600 with new configurations ............................... 90 7.2. License handling .......................................................................... 90 7.3. U...

  • Page 6

    6.

  • Page 7: About This Manual

    About this manual 1. Copyright 1.1. This document and parts thereof must not be reproduced or copied without written per- mission from abb, and the contents thereof must not be imparted to a third party, nor used for any unauthorized purpose. The software or hardware described in this document is fu...

  • Page 8: Conformity

    Be responsible or liable for any loss or damage resulting from the use of this manual or the application of the equipment. Conformity 1.3. This product complies with the directive of the council of the european communities on the approximation of the laws of the member states relating to electromagn...

  • Page 9: Use Of Symbols

    • the names of menus and menu items are boldfaced. For example, the file menu. • the following convention is used for menu operations: menuname > menu- item > cascadedmenuitem. For example: select file > new > type. • the start menu name always refers to the start menu on the windows taskbar. • syst...

  • Page 10: Terminology

    Terminology 1.8. Description term an abnormal state of a condition. Alarm an opc service for providing information about alarms and events to opc clients. Alarms and events; ae an opc service for providing information about process data to opc clients. Data access; da part of a logical node object r...

  • Page 11: Abbreviations

    Description term protection and/or control product supporting the spa protocol version 2.5 or earlier. Spa device xml-based description language for configurations of electrical substation ieds. Defined in iec 61850 standard. Substation configuration lan- guage; scl abbreviations 1.9. Description ab...

  • Page 12: Related Documents

    Description abbreviation substation automation sa substation configuration description scd substation configuration language scl sequential function chart sfc single line diagram sld simple network management protocol snmp simple network time protocol sntp simple object access protocol soap report c...

  • Page 13: Document Revisions

    Mrs number name of the manual 1mrs756569 mns is connectivity (opc) 1mrs756126 modbus serial master (opc) 1mrs756913 modbus serial slave (opc) 1mrs756445 modbus tcp master (opc) 1mrs756914 modbus tcp slave (opc) 1mrs752275 spa master (opc) 1mrs755497 spa router (opc) document revisions 1.11. History ...

  • Page 14: Introduction

    Introduction 2. General about the com600 series 2.1. The com600 series comprises of substation management units that are deployed together with protection and control relays and other communication devices, such as relion® protection and control relays and remote i/o units, to realize smart substati...

  • Page 15: Overview Of Com600

    The main reasons are the following: • to derive a maximum benefit from the versatility of the com600 series • to ensure an optimum feature set to be bundled together for a specific application • to ensure a future-proof product approach based on the primary intent or application, this release compri...

  • Page 16: Features

    Features 3. Gateway functionality 3.1. The gateway functionality provides a framework that enables the use of opc server and client components, such as opc client for iec 60870-5-101 and opc server for lon lag 1.4. This manual presents the principles that are common to the protocols available at the...

  • Page 17: Hmi

    Gwcomponents.Jpg figure 3.1-2 example of com600 gateway components hmi 3.2. Hmi functions 3.2.1. The hmi enables the user to access the com600 computer via a web browser. The features of hmi include: • substation, voltage level and bay single line diagram views • busbar coloring • event lists • alar...

  • Page 18: Opc Server

    Sld_example.Png figure 3.2.1-1 example view of the com600 hmi the hmi can be accessed: • locally via an optional local hmi screen • locally by connecting your laptop to com600 via lan • remotely through the internet or over lan/wan predefined user account 3.2.2. The predefined com600 user account al...

  • Page 19: Opc Client

    For publishing and updating data on the opc interfaces and protocol conversion between the opc and the protocol stack using the common iec 61850 data model. The configuration of the opc server and the protocol stack is handled using a configur- ation parser. The opc server is configured using sab600...

  • Page 20: Logic Processor

    Clientconcept_b.Bmp figure 3.4-1 conceptual view of opc client logic processor 3.5. Com600 offers an straightforward approach to the languages specified by the iec 61131- 3 standard for programmable logic controllers (plc). The programmable logic processor in com600 is offered as a selectable softwa...

  • Page 21: Data Historian

    Logic processor.Bmp figure 3.5-1 functional overview of logic processor codesys sp runtime system is manufactured by 3s-smart software solutions gmbh (www.3s-software.Com). Data historian 3.6. The com600 data historian is a real-time database designed and optimized for process information management...

  • Page 22: Iec 61850 Data Modeling

    The data historian can be used for accurate process performance monitoring by following process and equipment performance calculations with real-time and history values. Better understanding of the process behaviour by joining time-based process measure- ments with production and maintenance events ...

  • Page 23

    Iecmodelling.Jpg figure 3.7-1 overview of iec 61850 model usage the smallest unit in the iec 61850 modeling is a data attribute which is linked to an opc item in the opc server. A data attribute can be, for instance, the state value of a double point object (stval), quality information (q), or times...

  • Page 24: 3.8.

    Lonnamespace.Jpg figure 3.7-2 lon opc server name space in relation to iec 61850 model station/remote switch function 3.8. The com600 gateway provides a common station/remote (s/r) switch functionality for opc servers and clients. The s/r switch is used to determine whether the objects in a logical ...

  • Page 25: Com600 Watchdog

    Address filter property in the gateway object. Otherwise hmi is considered a remote hmi. The state of the station/remote switch controls whether the operations are allowed from hmi or not. The station/remote switch for the hmi is configured with the sld editor by inserting the station switch indicat...

  • Page 26: 3.12.

    Server. The diagnostic data can be further used on com600 hmi and gateway applica- tions. See 6.9, installing and configuring duo driver for installation and configuration details. Switch fault tolerance the switch fault tolerance feature of the intel network adapter requires the teaming feature to ...

  • Page 27: Event Printer

    When the measurement queue is full, an older update is always skipped when a new update is pushed the queue. The updates are skipped according to the following logic: • if an item has two or more updates, the oldest update is skipped • if no item has two or more updates, the oldest update in the que...

  • Page 28: Goose Analyzer

    Table 3.13-1 supervision events description event the event printer is incorrectly configured, the events cannot be printed. Failed to print event operating system print job limit reached. Pos- sible reasons are that events are occurring faster than the printer is able to print, or the printer is of...

  • Page 29: Technical Data

    Technical data 4. Mechanical properties 4.1. Com600_connectors.Png figure 4.1-1 com600 interfaces shown in a high voltage model. The com600 low voltage model includes the same interfaces but without the ac text. The technical data of com600 is presented in the following tables. Table 4.1-1 dimension...

  • Page 30

    Value description 220 w power consumption at start-up table 4.1-3 power supply, low voltage value description 24 .. 60 v dc u aux nominal 80..120% of u n (19 .. 72 v dc) u aux variation typical 25 w (with 24 v dc), max. 51 w (with 24 v dc) power consumption table 4.1-4 hardware value description cor...

  • Page 31

    Standard description according to iec 60529 degree of protection by enclosure according to iec 60255-5 clearance and creepage dis- tances table 4.1-8 power supply and module tests standard description according to iec 60255-1 auxiliary voltage according to iec 60255-11 aux. Voltage interruptions acc...

  • Page 32

    Standard description according to iec 61000-4-6 and iec 60255-22-6 • 10 v (80% ampl. Mod.) • f= 150 khz...80 mhz conducted radio frequency disturbance according to iec 61000-4-8, 300 a/m, continuous power frequency (50 hz) mag- netic field according to iec 61000-4-11 • 30% reduction for 10 ms • 60% ...

  • Page 33

    Standard description according to iec 60068-2-48 test values: • 72 h at +70ºc • 72 h at -40ºc storage test table 4.1-13 mechanical tests standard description according to iec 60068-2-6 and iec 60255-21-1 • f = 10...150 hz, ± 0.035 mm, 10…58 hz, 5 m/s2 58…150 hz • f = 10...150 hz, ± 0.075 mm, 10…58 h...

  • Page 34: Software Properties

    Table 4.1-16 rohs compliance complies with the rohs directive 2002/95/ec software properties 4.2. The software properties of com600 are presented in the following tables. Table 4.2-1 communication protocols slave protocol master protocol dnp3 lan/wan dnp3 lan/wan dnp3 serial dnp3 serial external opc...

  • Page 35

    Combined overcurrent and earth-fault relay spaj 141 c combined overcurrent and earth-fault relay spaj 142 c combined phase and neutral overcurrent relay spaj 144 c stabilized differential relay spad 346 c saco 16d series units digital annunciator unit saco 16d1 digital annunciator unit saco 16d3 dig...

  • Page 36: 4.3.

    Mounting of com600 computer 4.3. The com600 computer is designed for mounting at a control panel. To mount the com600 computer to the wall-mount kit: 1. See figure 4.3-1 for mounting instructions. 2. After the brackets have been installed, fasten four screws on each bracket. 3. After fastening the t...

  • Page 37: Disposing Of Com600

    3. Select integrated peripherals from the main setup menu. Use the cursor keys for moving and enter key for selection. 4. Select superio device from the next menu. 5. On the superio device configuration page, go to the com2 select parameter and press enter. Now you can choose between rs-232 and rs-4...

  • Page 38

    1. Polybutylene terephthalate 2. Polycarbonate 3. Polypropene 38 1mrs756125 com600 series, version 4.1 user's manual.

  • Page 39: Installation

    Installation 5. About this section 5.1. This section describes the installation and uninstallation of sab600, the installation of the touch screen, and modifying and setting up of the com600 computer. For more detailed instructions on installation of the gateway components, refer to the 1.10, relate...

  • Page 40: Updating Sab600

    • to select the default folder shown at the bottom of the window, click next. • to select another folder, click browse, select a new the folder, and click next. The default installation folder is c:\program files\abb\com600. 7. Select the desired installation type. • typical: this option is recommen...

  • Page 41: 5.5.

    To convert a project: 1. Open the old project in the new sab600. The conversion wizard is launched auto- matically. Follow the wizard instructions. 2. If the conversion wizard was canceled, you can run the conversion by right-clicking on the gateway object and selecting convert project. Follow the w...

  • Page 42

    By default, response to the ping command is blocked by the firewall. To allow ping response, change the allow incoming echo requests configuration setting in the firewall's advanced icmp settings. Table 5.5.1-1 shows the default ip addresses for the lan ports. Table 5.5.1-1 default ip addresses for ...

  • Page 43

    Built-in user accounts the following user account is predefined in the com600 computer: • username: com600 • password: aec2006rs this is the main account of the com600 computer. It is used for configuration purposes. Processes of the com600 computer are run under this account. It will also work as a...

  • Page 44

    The ip addresses of the computers into the same subnetwork. By default, the commu- nication from sab600 to the com600 computer will use tcp port 8080. Make sure that the port is opened in the firewall of the sab600 computer. For callbacks from com600 computer another port is required. This is used b...

  • Page 45

    If multiple network adapters are used in sab600 computer, you must specify the one that is used for the com600 communication. In the set remoting parameters utility, select the ip address of the sab600 network adapter used for the com600 communic- ation. Set remoting parameters sab600.Png figure 5.5...

  • Page 46: Uninstalling Sab600

    3. In the com600 web hmi, navigate to communication > security settings > remote desktop settings. Select one of the allow connections options and click apply. Remote desktop connections will now be enabled for the com600 computer. Config of headless com600 - sec settings.Png figure 5.5.2-1 security...

  • Page 47: 5.7.

    1. Open the add or remove programs dialog by selecting start > settings > control panel > add or remove programs in the windows task bar. 2. Select sab600 and click remove. The uninstallation only removes sab600 so that you can install a new version and update the software. It does not remove the mi...

  • Page 48: Configuration

    Configuration 6. Opening a project in station automation builder 600 6.1. This section describes the configuration tasks common to all opc servers, and gives an overview of the configuration tasks related to opc clients. All the possible configuration scenarios are not included in this manual. Refer...

  • Page 49: 6.3.

    Description. Data objects include configuration properties, that contain cross-referencing information between protocol and the opc/iec 61850. Process data is connected to a gateway client using a cross-references function available in the client ied object. Data objects that are transferred to the ...

  • Page 50

    1. Select file > open/manage project.... 2. In the open/manage project dialog, select the required location for the project: • projects on my computer • projects on network 3. Select new project on the left. • enter a project name. The description is optional. 4. Click create. 5. Click open project....

  • Page 51

    1. Building the object tree and configuring the object properties for opc servers (process communication). 2. Building the substation object tree and configuring the object properties for hmi functions. 3. Activating com600 with a new configuration. First, build an object tree by adding objects to t...

  • Page 52

    Point, make sure that you have already created and configured the event and scale objects. One instance of iec 61850 opc server is always mandatory. For more detailed information on adding objects to the object tree, refer to the appropriate protocol manual (see 1.10, related documents). Substation ...

  • Page 53

    Clientcomstruc.Jpg figure 6.4.2.4-1 example of opc client communication structure the opc client object is added to the same hierarchy level as the opc server, see fig- ure 6.4.2.4-1. Below the opc client object, you can add only channel and device objects. The data objects are linked using the cros...

  • Page 54

    Objprop.Png figure 6.4.2.5-1 example of object properties 3. Select the property you want to configure. Depending on the property value type, configuring is always done either by • selecting a predefined value from a drop-down combo box, or • entering a text string or a numerical value in a text fie...

  • Page 55

    2. Browse to a new configuration file from the appearing dialog. 3. Select the file and click open. 4. Select the device to import from the drop-down list. You can preview the configur- ation on the right. 5. Click import. The new preconfigured objects appear in the object tree. If the configuration...

  • Page 56

    4. Select the file and click open. 5. In the dropdown menu, select the opc server, subnetwork or ied, and accesspoint (depending on whether the scl import has been selected from opc server or ied object) to be imported. Sclimport_opcserver.Png figure 6.4.2.6-2 selecting opc server to be imported 6. ...

  • Page 57

    Sclimport_communicationoptions.Png figure 6.4.2.6-3 communication options you can select the following options: • filter data objects that don't belong to dataset: by selecting this option, you can enhance performance. This option limits the amount of data objects being created in sab600, meaning th...

  • Page 58

    • check report control block for client identity: this option imports ieds from the file in which the report control blocks' client identity matches the selected opc server. • check configuration revisions: by selecting this option, the configuration revision attributes of the project are compared w...

  • Page 59

    Sclimport_substationoptions.Png figure 6.4.2.6-4 substation options 2. Click next to proceed to the configure alarm and event template page or import if you do not want to change options in the following pages. Configure alarm and event template 1. Select the alarm and event template for ieds on the...

  • Page 60

    Sclimport_aetemplate.Png figure 6.4.2.6-5 alarm and event template you can also create your own templates if you are familiar with the issue: • browse to c:\pcmdatabases\com600\templatemanager. • copy the aetemplatephasetrippingmapping.Xml file from the folder to the directory and give it a meaningf...

  • Page 61

    Sclimport_pfttemplate.Png figure 6.4.2.6-6 parameter filtering tool template you can use the parameter filtering template to set predefined parameters for the ied. • if you want to use the parameter filtering tool template when importing the ied, select the use template checkbox. • select a template...

  • Page 62

    Sclimport_sldtemplate.Png figure 6.4.2.6-7 sld template you can use the sld template to set the predefined substation structure for the ied. • if you want to use the sld template when importing the ied, select the use template checkbox. • select a template in the dropdown menu. The dropdown menu sho...

  • Page 63

    Sclimport_ssttemplate.Png figure 6.4.2.6-8 summary table template you can use the summary table template to set predefined summary tables for ieds in substation and bay objects. • if you want to use the summary table template when importing the ieds, select the use template checkbox. • templates sto...

  • Page 64

    For data model is modeled on the ld0\lln0amplt\configrev object. It is the most important indicator of the configuration revision. Additionally, each report control block has a confrev attribute that defines the revision and the dataset of rcb. System consistency check checks each lds lln0amplt\...

  • Page 65

    Scc_gui.Png figure 6.4.2.7-1 system consistency check view scc_options.Png figure 6.4.2.7-2 options view the options view allows you to select same importing options that are available in the scl import tool. It is recommended that same options are used with both functions. 65 com600 series, version...

  • Page 66

    Scc details.Bmp figure 6.4.2.7-3 details view the details view shows added or deleted lds and rcbs. Additionally, it shows the modifications to the content of ld or rcb. Cross-references function 6.4.2.8. Data objects are added differently for opc clients than for the upper level objects. Drag and d...

  • Page 67

    Crossreferencesfunction.Jpg figure 6.4.2.8-1 cross-references function in the cross-references function, you can use a filter file to leave out some of the data objects to be connected to the slave device. Select the filter file from the drop-down menu under active filter. If there are no filter fil...

  • Page 68

    For more detailed instructions on configuring the data object properties in the cross- references function, refer to the slave protocol user’s manuals listed in 1.10, related documents. Template based cross-referencing the purpose of this functionality is to provide a template functionality for slav...

  • Page 69

    When template functionality is enabled, dropped data objects are compared to the data in the template. If matching data is found, the address properties are modified according to template. Ied_base_addresses.Png figure 6.4.2.8-3 base addresses base addresses the base address determines the base addr...

  • Page 70

    Uplink_address_addrow.Png figure 6.4.2.8-4 uplink addresses filter functionality in uplink address table • import - imports another template file from hard drive • export - saves current template file to hard drive • cid import - creates base template based on datasets in imported cid file • apply -...

  • Page 71

    Uplink_address_table.Png figure 6.4.2.8-5 uplink address table adding row in uplink address table you can add rows to the template by editing values of the cells in rows marked with *. Uplink_address_filter.Png figure 6.4.2.8-6 71 com600 series, version 4.1 1mrs756125 user's manual.

  • Page 72

    Editing values ideally you don't have to add any signals to the template manually. All cells are editable, but you are supposed to edit only the index columns. These columns represent signal addresses to be for that ied type. Cid import signal selector cid_import_signal_selector.Png figure 6.4.2.8-7...

  • Page 73

    Configuration of station/remote switch 6.4.3. Each ied and logical device in the opc server has a configuration parameter defining the opc node path for the s/r switch that is used for that ied/logical device. If a logical device does not have an s/r switch path configured, the path defined in the i...

  • Page 74

    To create an alarm group: 1. Create virtual application opc server. 2. Create virtual subnetwork. 3. Create virtual ied. 4. Create virtual ld. 5. Create ln. 6. Create groupalarm sps object if you are going to create several group alarm objects, rename each object with a unique name within ln. 7. Ope...

  • Page 75

    If the alarm group contains any signal with bad or unknown quality then the alarm group is active. The quality of the group alarm is always good. • unknown signal states ignored group alarm is calculated using only the signals with good/known quality. If no signals have good/known quality then the g...

  • Page 76

    Description value property specifies the code page that is used to convert strings (event) to be printed into bytes that are sent to the printer. Event printer code page specifies whether the event printer functionality is in use. False true event printer enabled the name of the printer used by the ...

  • Page 77

    Before you can connect a scale to a data object, add and con- figure the scale in sab600. Add and configure the scales before adding and configuring any other objects. Creating scales 6.4.5.2. To create scales: 1. Right-click scale definitions in sab600, see figure 6.4.5.2-1. 2. Select new -> scales...

  • Page 78

    2. The object properties appear now in the object properties window, see figure 6.4.5.3- 1. 3. You can assign the scale with parameter values. Scaledefobjprop.Jpg figure 6.4.5.3-1 object properties of the scales table 6.4.5.3-1 scales description value or value range/ default property/para- meter ba...

  • Page 79: Backing Up And Restoring

    Description value or value range/ default property/para- meter scaled value - 03 out value value to be scaled - 04 in value scaled value - 04 out value value to be scaled - 05 in value scaled value - 05 out value value to be scaled - 06 in value scaled value - 06 out value value to be scaled - 07 in...

  • Page 80: Scl Export

    To retrieve and existing configuration: 1. Right click the gateway object in the communication view. 2. Select management. 3. From configuration control, click retrieve com600 configuration. 4. In the file view, browse to the location of the required configuration file. 5. Click open. This functiona...

  • Page 81: 6.8.

    Configuring external watchdog for com600 6.8. The communication to the ied used as a watchdog is configured as with any ieds using sab600. The ied is configured with spc or inc type of data object to which the cyclical command is sent. To configure com600 to use an ied as an external watchdog: 1. Ri...

  • Page 82: 6.10.

    By default duodriver virtual adapter name has # character in it. Remove # from the name as it causes problems with the opc naming. Installing intel teaming feature to com600 6.10. The teaming feature is available only if a lan optional card has been installed in com600. Teaming features include fail...

  • Page 83

    Intel_pro_port_server_adapter.Jpg figure 6.10-1 opening the teaming tab 6. Select team this adapter with other adapters and click new team. 7. Specify a name for the team and click next. New_team_wizard.Png figure 6.10-2 new team wizard 83 com600 series, version 4.1 1mrs756125 user's manual.

  • Page 84: Configuring Data Historian

    8. Unselect intel(r) 82657lm gigabit network connection adapter and select both intel(r) pro/1000 mt dual port server adapters. Click next. 9. Select switch fault tolerance to a team mode and click next. Switch_fault_tolerance.Jpg figure 6.10-3 switch fault tolerance selection 10. Click finish to st...

  • Page 85

    2. The following file browser dialog opens. Rtdbtimezone.Bmp figure 6.11.1-1 time zone definition 3. Select the time zone from the list and click open. 4. Reboot the computer so that the service processes notice the new setting. The setting is stored in a system environment variable. Preconfiguring ...

  • Page 86

    Hmi_data_historian_menu.Bmp figure 6.11.1-2 data historian menu item shown in web hmi to enable the vtrin installation to client computers, select start -> all programs -> data historian -> change vtrin ip address from the com600 computer start menu. If the ip address of the com600 computer is chang...

  • Page 87

    Datahistorianconfiguration.Bmp figure 6.11.2-1 opening data historian configuration tool 2. The trend configuration dialog opens. Datahistorianconfigurationtool.Bmp figure 6.11.2-2 data historian configuration tool 3. Drag and drop data objects to the data historian configuration tool, where they ar...

  • Page 88: 6.12.

    Levels columns, although the values are set according to the values defined for the data object. 4. You can modify the editable values. Check the values for the history levels column from com600 data historian operator's manual. 5. Select the desired signals for the configuration with the checkboxes...

  • Page 89

    The task is named “\com600\com600eventstorebackup” in the windows task scheduler. It is disabled by default. When enabled, the task launches the com600eventstorebackup.Bat script with the intended backup location as the input parameter. To automatically backup com600 security event list 1. Log into ...

  • Page 90: Operation

    Operation 7. Activating com600 with new configurations 7.1. After the configurable objects in the object tree have been created, the configuration must be transferred to the com600 computer. This is done by using the management function. To activate the com600 configuration 1. Right-click the gatewa...

  • Page 91: 7.3.

    • number of clients supported by the license. • if webhmi is enabled. To update the license with a new set of protocols, order a new license from abb and update it to com600 with sab600. To update the license: 1. Open the management tool from the gateway object in sab600. 2. Click update license. 3....

  • Page 92

    A. Select start > control panel > administrative tools > internet information services. B. In the tree view, select the computer and then web sites. C. Right-click default web site and select properties. D. In the properties dialog, select directory security > view certificate > details > copy to fi...

  • Page 93: Diagnostics

    Diagnostics 7.4. General about diagnostics 7.4.1. Sab600 provides comprehensive functions for diagnosing the operation of the gateway. This includes communication diagnostics with monitoring the communication channel, diagnostic counters, and ied-specific communication status and diagnostic counters...

  • Page 94

    Eventdial.Jpg figure 7.4.1-2 an example of a spa event log file channel online diagnostics with analyzer 7.4.2. The analyzer function is available in the channel diagnostics for most of the protocols. The analyzer function shows transmitted and received telegrams in hex format. In addition, it can s...

  • Page 95

    2. Select data object diagnostics from the shortcut menu, see figure 7.4.3-1. The data object diagnostic dialog opens. 3. Drag and drop data objects from the object tree to the data object diagnostics. Or 1. Select a specific data object from the object tree. 2. Select tools > online diagnostics. Da...

  • Page 96

    Lon_clock_master_online_diagnostics.Jpg figure 7.4.4-1 an example of lon clock master online diagnostics for more detailed information and instructions on controlling and monitoring channel and device communication, refer to the respective user’s manual for the client or server (see 1.10, related do...

  • Page 97

    Iec101aeclient.Jpg figure 7.4.5-1 iec101 slave opc client diagnostic ae client diagnostic web server 7.4.6. The diagnostic web server of the gateway provides an overall view of the communic- ation status of the gateway and the possibility to monitor the diagnostic counters of the communication chann...

  • Page 98

    Com610_hmi.Jpg figure 7.4.6-1 an example of a web page from the gateway diagnostic web server 98 1mrs756125 com600 series, version 4.1 user's manual.

  • Page 99: Index

    Index a activating com600 ............................................................................................. 90 b backup ............................................................................................................... 79 building object tree ...................................

  • Page 100

    E event printer ....................................................................................................... 27 configuring ..................................................................................................... 75 exporting configuration files .................................

  • Page 101

    O object properties configuration .................................................................................................. 53 object tree .......................................................................................................... 49 building ....................................

  • Page 102

    Station/remote switch ........................................................................................ 24 structure opc client ...................................................................................................... 19 opc server ...................................................

  • Page 104

    Contact us 1mrs756125 k/13.3.2015 © copyright 2015 abb. All rights reserved. Abb oy distribution automation p.O. Box 699 fi-65101 vaasa, finland tel. +358 10 22 11 fax. +358 10 224 1094 abb inc. Distribution automation 655 century point lake mary, fl 32746, usa tel: +1 407 732 2000 fax: +1 407 732 2...