ABB i-bus KNX FCL/S 1.6.1.1 Product Manual - page 46
ABB i-bus
®
KNX
Start-up
44 2CDC508116D0203 | FCL/S x.6.1.1
3.2.2.3
Parameter window
- A: Fan
(One-level)
All settings for output A are made in this parameter window.
These explanations also apply to outputs C, D, E if the parameter
Outputs C, D, E
, p.20 is set to
Enable as fans
.
All settings for the
single-speed fan
are made in this parameter window.
Fan type
Option:
Multi-level
One-level
This parameter sets which type of fan is to be controlled.
To control a fan with up to three speeds select the
Multi-level
option.
To control a single-speed fan, select the
One-level
option.
Fan on bus voltage failure
Option:
Unchanged
OFF
ON
The response of the fan on bus voltage failure is defined here.
Unchanged
: The fan speed remains the same.
OFF
: The fan is switched off.
ON
: The fan is switched on.