Accutome ACCUPEN User Manual - page 13
Accutome AccuPen User’s Guide
8
www.accutome.com
• (800) 979-2020 US & CA • (610) 889-0200 International • +31 (0) 485-350300 Europe
Chapter 3: Getting Started
3
Getting Started
Overview
The AccuPen is designed to be used in multiple medical settings and can be rested
on a surface, such as a counter or desk. The AccuPen requires no assembly.
Unpacking Instructions
Upon receiving the AccuPen:
1. Remove the AccuPen Tonometer
case from the protective shipping
materials. Save the shipping materials
for use if return or repair becomes
necessary.
2. Check for missing items. The AccuPen
Tonometer, this guide, a battery, a
screwdriver, a box of 100 AccuTip
single-use latex tip covers, and a
lanyard should be included inside the
case.
3. Visually inspect the AccuPen
Tonometer for damage.
CAUTION: AccuTips contain natural rubber latex,
which may cause allergic reactions. Question patients about allergies to latex before
examining them with the AccuPen.
Accessories Included with the AccuPen
1. (1) XENO 3.6V Lithium Battery
2. (1) User’s Guide
3. (1) Screwdriver
4. (1) Lanyard
5. (1) Box of AccuTips
Note: Notify Accutome, Inc., immediately if any components are missing or
damaged. See Chapter 6 of this manual for contact information.
Battery Specification and Installation
The power source for the AccuPen is a 3.6 V Lithium battery. The battery is included
with the AccuPen and must be installed before use.
Battery Specification
Use only one (1) 3.6 V, XENO model XLP-050F lithium battery, or an equivalent.
Figure 3.1 - AccuPen Unpacked