Accutome ACCUPEN User Manual - page 19
Accutome AccuPen User’s Guide
14
www.accutome.com
• (800) 979-2020 US & CA • (610) 889-0200 International • +31 (0) 485-350300 Europe
General Maintenance
Maintenance that should be performed on the AccuPen consists of activities such
as keeping surfaces free of dust and dirt and storing in a dry and cool place so as
to not adversely effect electronic parts.
Refer to page 3 for details on sterilization, disinfection, and cleaning before doing
any sterilization, disinfection, or cleaning of the AccuPen.
CAUTION: No abrasives or harsh cleaning solutions should be used while cleaning
the AccuPen.
Note: The unit does not contain any user replaceable parts other than the
battery.
Maintenance and Cleaning
Clean the AccuPen Tonometer by wiping everything except the tip with a clean, lint-
free, non-abrasive cloth and alcohol. Clean the AccuPen Tonometer tip by wiping
the tip with alcohol and allowing it to air dry. Do not drop the device. Avoid any shock
or excessive vibration as this may damage the unit. Do not immerse the device in
any fluid. This will damage the electronics and invalidate the warranty.
Note: See Chapter 2 for detailed cleaning instructions and see Chapter 3 for
battery specification and installation.
Storage
1. When not in use, the AccuPen Tonometer and all accessories should be
placed in the storage case.
2. If the AccuPen Tonometer is not to be used for an extended period of time,
remove the battery from the device.
Troubleshooting
Refer to Table 4.1 below for information on identifying and correcting problems that
can occur with the AccuPen.
Table 4.1 - AccuPen Troubleshooting Information
Symptom
Probable Cause
Correction
“LOW BATT”
displayed
Battery is low
Replace battery (see Chapter 3)
Multiple variable
readings
Improper technique
Review measurement technique
Getting Started
Chapter 4: Maintenance, Storage & Troubleshooting
4
Maintenance, Storage
& Troubleshooting