AirPac COOLIT3000 Instruction Manual - page 10
Control Panel
Oscillating
Vertical Grill
Adjustable
Horizontal
Louvers
Supply Air Vent
Condenser
Air Discharge
UNIT OVERVIEW— COOLIT 3300
FRONT VIEW
Keyed Access Door to Condensate Tanks,
Internal Condensate Pump System and Stor-
age for Vinyl Tubing
7
Keyed Filter
Access
Place Ceiling Adapter
into the ceiling grid.
12
AirPac’s unique patent-pending air dis-
charge design is integral to the
COOLIT3300 and requires no assembly.
The duct section compresses into the
cabinet. The integral ducting system is
typically used to duct exhaust
(condenser) air into the ceiling plenum
or out through a window panel.
•
The Ceiling Panel stores behind the
service door (rear door). The Ceiling
Panel will replace a 24” x 24” drop
ceiling tile and is convenient for
temporary and emergency installa-
tions requiring exhaust into a ceiling
plenum. Check with local building
codes to see if your building will ac-
cept this type of exhaust.
•
Move a ceiling tile out of the grid
and replace it with the Ceiling
Panel. Make sure the ceiling panel
is positioned properly in the ceiling
grid and cannot fall out. There
should be at least 18 - 24” of open
space above the ceiling panel outlet
so exhaust air is not blocked.
•
Slowly lift the warm air duct from the
top of the unit. Press in on both
sides of the tension spring and fit
the collar into the Ceiling Panel.
Once the hooks of the spring are
above the Ceiling Panel release the
tension spring. The collar and duct
should stay up in place.
AIR DISCHARGE
COOLIIT 3300
Extend duct and fit
collar into opening.
COOLIT 3600 and COOLIT 3900 users
Follow instructions provided with Con-
denser Air Make-up Plenum and Con-
denser Air Window Kit .