B&K AVP1030 Owner's Manual - Making The Connection

Page 16

Making the connection

Take a look at the back panel of the AVP.  You will notice that the RCA-type audio input

and output connectors are identified by colors.  Red for right channel and white for the

left channel audio.  Composite video input and output connectors are identified by

yellow.  Digital inputs are identified by orange.  The surround outputs are identified by

black.  The audio inputs and outputs start at the center of the back panel and continue

to the right.  The video inputs and outputs are near the left side of the back panel.

Audio only equipment

The procedure listed is for connecting a CD player to the AVP analog inputs. 

1.

Attach one end of the audio interconnect cable to the left audio output on the CD

player, then attach the other end to the white left CD audio input on the AVP.

2.

Attach one end of the audio interconnect cable to the right audio output on the

CD player, then attach the other end to the red right CD audio input on the AVP.

Audio / Video source

The procedure listed is for connecting a DVD/VLD player to the AVP analog

inputs.  Use the same instructions for connecting other audio / video sources to

the TV-V3 input.

1.

Attach one end of the audio interconnect cable to the left audio output on the

DVD/VLD player, then attach the other end to the white left DVD/VLD audio input

on the AVP.

2.

Attach one end of the audio interconnect cable to the right audio output on the

DVD/VLD player, then attach the other end to the red right DVD/VLD audio input

on the AVP.

3.

Attach one end of the composite video interconnect cable to the video out  on the

DVD/VLD player, then attach the other end to the yellow video input on the AVP

labeled DVD/VLD.