B&K AVP1030 Owner's Manual - page 31
Page 29
'$
.
'
Tuner functions
After selecting TUNER, the internal AM/FM tuner features are controlled as follows:
For Controlling:
Use Buttons:
Description:
AM/FM Band
BAND
Alternates between AM and FM bands.
Tuning/Seek
TUNE -/+
Adjusts tuning frequency.
Direct Frequency Entry
FREQ then number keypad (0-9)
To directly enter a station frequency.
FM Stereo/Mono
MENU then
x
Manually select between stereo and
mono reception.
Save a Station Preset
SAVE, STATION -/+, then
To save a desired station to memory.
ENTER
There are 20 presets per band.
Recall a Station Preset
STATION -/+
To recall a saved station.
Auto-program Station
MENU then ENTER
Allows the AVP to program the Station
presets
memory for you.
Tuner Operation
AM/FM Band -
Changing band is accomplished by simply pressing the BAND
button. It will toggle the tuner between the FM and AM band.
Tuning/Seek -
Adjusts the tuners frequency to tune in a desired station. Pressing
TUNE once steps frequency manually while pressing and holding
momentarily engages “seek”.
Direct Frequency
Entry -
To enter a station’s frequency directly into the tuner. Press the
FREQ button on the remote.
The message ENTER FREQUENCY will appear on the display.
Enter the numbers of the desired station frequency using the
numeric keypad (0-9).
Example:
Press FREQ , then 9 6 9. The dot “.” is automatic.
Display will show: