B&K AVP1030 Owner's Manual - page 33

Page 31

  '$

.

' 

  '$

.

' 

 )

d

your station.  The display should read (assuming you picked preset 01):

The display should now look like this:

You have now saved the station into the preset 01.

There are two tuner A/V presets you can also save.  These presets are the A/V preset

numbers 5 and A5.  If you do not save these presets the AVP will always pick the

default frequency of 87.50 MHZ when you press 5 (or A5) and ENTER.

Bring your favorite station up on the display:  

Set the desired volume level:

Set the desired mode (example: stereo front to rear):

Note: You may use any mode you wish.

Press SAVE, 5, then ENTER, and the display shows:

You have now saved your favorite station under A/V preset 5.  You may follow the same

procedure for the preset A5.

Recall a Station

Preset -

Simply press the STATION +/- buttons until your desired station is

displayed.

Auto-program

Station Presets -

Select the band you wish to auto-program (AM or FM).