BABYSTYLE OYSTER Instruction Manual - Folding The Chassis With
Step 3: With the button held fully
down and the sliders fully pulled
back, lift the whole handle and
push away from yourself. If the
handle does not move easily it is
likely that the button is not fully
pressed down and/or the sliders
are not fully pulled back, if this
happens repeat steps 1 and 2
until the handle moves easily in
the direction shown by the arrow
in the image below.
CAUTION: It is important when folding the
chassis that the button is fully pressed down
and that the sliders are fully lifted before
lifting the handle is lifted, failure to ensure
this is could damage the folding device.
Step 3. Lift the
handle and
push away from
yourself
FOLDING THE CHASSIS WITH
THE SEAT UNIT FITTED
The Oyster can be folded with the seat unit fi tted facing
either forwards or backwards.
To fold the chassis with the seat unit facing forwards:
Remove the bumper bar. Pull the backrest seat recline
lever and fold the backrest forward so that it lies
completely fl at on the seat base. If the seat back rest stops
before it is completely fl at, lift the backrest seat recline
lever a little more, and lower the seat back rest. The
chassis can now be folded as described above in “FOLDING
THE CHASSIS”
To fold the chassis with the seat unit facing backwards:
Remove the bumper bar. Pull the backrest seat recline lever
and fold the backrest so that it lies completely fl at on the
seat base. If the seat back rest stops before it is completely
fl at, lift the backrest seat recline lever a little more, and
lower the seat back rest. The chassis can now be folded as
described in “FOLDING THE CHASSIS”
The most compact fold is achieved with the seat unit
removed.
13