BABYSTYLE OYSTER Instruction Manual - Fitting The Footmuff
FITTING THE FOOTMUFF
The footmuff top cover can be removed by unfastening the
zip. The base of the footmuff can be used as a seat liner
without the top part.
To attach the footmuff to the seat unit: Release the harness
clips from the centre buckle and release the shoulder straps
from the waist belts at the buckle connection. Pass the
shoulder straps and waist belts through the corresponding
openings in the footmuff. Pass the crotch strap through
the opening in the footmuff. Attach the two press-studs at
the rear top of the seat backrest to the two press-studs on
the top of the footmuff.
FITTING THE STROLLER RAIN
COVER
Place the rain cover over the stroller; the rain cover needs
the stroller hood to be fi tted to support the rain cover.
Fasten the Velcro strips at the front of the rain cover
around the front legs of the stroller (when the seat unit is
facing forwards). When the seat unit is facing rearwards,
fasten the Velcro strips at the front of the rain cover around
the rear legs to secure. Fasten the strap at the back of the
seat unit by joining the press-studs.
FITTING THE CARRY COT RAIN
COVER
With the carrycot hood in the upright position place the
rain cover over the hood so that the fl ap on the rain cover
corresponds with the opening in the carry cot hood. Pull
the rain cover down to the rear of the hood so that the
elasticated edge covers the rear of the carrycot. Ease the
front part of the rain cover over the apron and down and
around the front and sides of the carrycot.
25