BABYSTYLE OYSTER Instruction Manual - page 26
Regularly check screws, rivets, bolts & fastenings to ensure
•
they are locked tight and secure. Replace any parts in an
inferior condition. Should you intend to use the pushchair
during the winter, by the sea or off-road; it is important to
clean thoroughly & dry the vehicle after use. Salt from the
ocean or from roads will corrode metal parts unless
removed. After use in these circumstances clean with fresh
water and thoroughly dry after use.
Check on a regular basis that all chassis locking devices are
•
working correctly.
If any part of the pushchair is damaged contact your local
•
Babystyle retailer immediately without using the pushchair.
Do not expose your pushchair to excessive sunlight for
•
extensive periods of time, even normal exposure to sunlight
may cause the colour of the fabric to change.
Take care not to tear the fabrics while transporting the
•
pushchair.
Light oil or silicone spray is suitable to use as a lubricant for
•
moving parts. Petroleum jelly is a good lubricant to use on
the front axle stubs. Periodically remove the front swivel
wheel units clean and lubricate with petroleum jelly.
Ensure that zips are either fully open or fully closed or they
•
may be damaged.
Always use the rain cover in inclement weather.
•
Do not place items on the hood/canopy, it may damage the
•
vehicle and/or render it unsafe.
Rubber tyres can leave marks on some surfaces. The tyres
•
can react with some surfaces (vinyl fl oor coverings, carpets
etc.) and cause stains. Always stand the stroller on a
protective surface indoors.
Routinely clean the metal parts with a damp cloth & then
•
dry immediately
Fabrics should be cleaned following the guidance on the
•
care labels.
Do not wash in the washing machine. Sponge clean or
•
hand wash with mild detergent and warm water (30°C)
C A R E A N D M A I N T E N A N C E
26