Barazza 1PLBC3IDN Installation And Use Manual - page 24
24
8) STEUERUNGSSPERRE
Diese Funktion kann nur aktiviert werden, wenn
die Garzonen nicht ausgewählt wurden.
Es ist möglich, die Bedienelemente zu sperren, um die
Gefahr zu umgehen, dass ungewollte Änderungen an
den Einstellungen (durch Kinder, Reinigungsarbeiten
usw.) vorgenommen werden.
Um die „Steuerungssperre“ zu aktivieren, drücken
Sie gleichzeitig die Taste
„C“
(unten rechts) und die
Taste
„D“
, und anschließend erneut die Taste
„C“
; die 2
Leds zeigen das Symbol
„L“
an, um auf die ausgeführte
Steuerungssperre hinzuweisen (Abb.17).
Um die Steuerungen gleichzeitig zu lösen und zurück
zu den Einstellungen zu kommen (z. B. das Garen
unterbrechen), müssen Sie gleichzeitig die Tasten
„C“
(unten rechts) und
„D“
drücken; die 2 Leds zeigen
das blinkende Symbol
„0“
an und nun können die
Einstellungen verändert werden.
Wenn die Sperre der Bedienelemente aktiv ist, kann
das Kochfeld ausgeschaltet werden.
In diesem Fall bleibt die Steuerungssperre auch beim
nächsten Einschalten des Kochfelds aktiv.
Um definitiv die „Steuerungssperre“ zu deaktivieren,
drücken Sie gleichzeitig die Tasten
„C“
(unten rechts)
und die Taste
„D“
, und dann erneut die Taste
„D“
.
Das Kochfeld schaltet sich aus und beim erneuten
Einschalten ist die Steuerungssperre nicht mehr aktiv.
8) CONTROL PANEL LOCK
This function is can be activated only if the cooking
zones aren’t selected.
It is possible to lock the controls to prevent the risk of
unintentional modification of the settings (children,
cleaning, etc.).
To activate the
“control panel lock”, press keys “C”
(bottom right) and
“D” at the same time, then key “C”
once again; the 2 LED lights will display the symbol
“L”
to indicate that the control panel lock has been imple-
mented
(fig.17).
To temporarily unlock the commands and return to
making adjustments (e.g. interrupting cooking), you
must press keys “
C” (bottom right) and “D” at the
same time; the 2 LED lights will display the flashing
symbol
“0” indicating that it is now possible to make
adjustments.
It is possible to switch off the hob when the control panel
lock is active.
In such a case, the control panel lock remains active
when the hob is turned back on.
To unlock the
“control panel lock” permanently, you
must press keys
“C” (bottom right) and “D” at the same
time, then key
“D” once again.
The hob will switch itself off and upon switching back on,
the control panel lock will no longer be active.
24
g p
p
g
1
C
D
2
C
G
G
3
C
D
4
C
G
G
17