Barco R9002380 Installation Manual - page 26
Installation Adjustments
6-2
5976067 BARCOCINE 7 151299
INSTALLATION
RASTER CENTERING
OPTICAL LENS FOCUSING
SCHEIMPFLUG ADJUSTMENT
CRT PROJECTION ANGLE ADJUSTMENT
ADJUSTMENT MODE
enter
password
xxxx
wrong
password
!!!
COMPOSE
PASSWORD
????
Select
é
,
ê
è
or
ç
then
7
8
9
4
5
6
1
2
3
0
When the password mode is active, your password will be asked (menu 1).
Your password contains 4 digits.
Adjusting the projector with the RCU.
Enter the digits with the numeric keys on the RCU.
Example : 2 3 1 9
For each digit entered, a 'X' appears on the screen under the displayed text 'enter password'.
When your password is correct, you get access to the 'Installation mode'.
When the entered password is wrong, The message
'Wrong password !!!' will be displayed (menu 2). The projector stays on the
previous selected item.
Factory programmed
password :
0000
menu 1
menu 2
Adjusting the projector with the local keypad.
When the 'compose password' menu is displayed (menu 1), select with the cursor keys the first digit of your password and press
ENTER. Continue by selecting the second digit with the cursor keys and press ENTER. Handle in the same way for the third and
fourth digit.
When your password is correct, you get access to the 'Installation mode'.
When the entered password is wrong, the message
'Wrong password' will be displayed.
menu 1
Overview flow chart installation mode.